How To Get Rid Of Squeaky Floors

Wood Floors

When it comes to wood floors in your home, you might find them at some point starting to squeak, you will mainly find this on stairs. Now other than the annoying sounds they create, a squeaky hardwood floor can indicate more under laying problems. Floor squeaking is a sign that some gaping has occurred between the hardwood boards and as a result of the wood drying out and shrinking over time. When these dried out floorboards are walked on, they rub against one another and a squeaking noise is produced. While the damage to the floor might not be visually apparent, the tell tale squeak will give it away.

It is important that you tend to these squeaky floorboards as soon as you can, because not doing so could cause your home to depreciate in value over time.

Methods to Prevent Squeaky Floors


Sprinkle some talcum powder of some powdered graphite, (this is available at hardware stores or on the internet), make sure you place it along the seams of the floorboards. You will then want to cover the powder with a cloth and step on the boards. This will ensure that the powder will work its way into the seams. The powder should then provide enough lubrication to keep the boards from rubbing against one another. This though is only a temporary solution.

If you have access to the underside of the floor

Another tactic you can use is to check the cross bracing (this is when boards are nailed diagonally across studs or other boards to make the framework more rigid) between the floor joists, if it’s loose then reattach it using screws. Also place shims on top of the floor joists directly under your floorboards. Then firmly but very carefully push the shims in. You may also want to fasten the floor joists with screws driven in at an angle through the floor joist to the sub floor.

If you don’t have access the underside of the floor

Install 2” or 2 ½” flooring nails at least ½ inch from the edges of the floorboard and drive them in at an angle. You will also want to per-drill holes slightly smaller than the nail shanks through the floorboards (make sure you don’t go through the sub floor). This will ensure that there is a good hold and prevents the floorboards from splitting. You will then want to use a nail set to drive the nail heads below the floor surface; you can then fill the holes using color matched wood filler.

You may also use screws instead of nails if you prefer, over time screws generally hold better than nails. Countersink (this is the process of making the head of a screw or bolt sink into a prepared depression, this ensures that it is flush with or below the surface of the floor) the screws and patch the holes with wood floor filler.

If you have carpet over your hardwood floor

You will want to roll the carpet back to access the floorboards. If this isn’t an option you can hold the boards together by nailing through the carpet. A stud finder can help you located under laying joists to drive your nails through. Don’t attempt this with screws as they will just end up being tangled up in your carpet.

A squeaky floor is not match for a gang of nails and screws, but any of the above methods should get rid of the squeaking. Of course you should consult a professional for their advice on the gaping that is occurring.

Renovation With Vinyl

If you have always wanted a polished wooden floor in your house but it’s just not practical, there is still a solution in vinyl flooring. No longer associated with horrific patterns, vinyl flooring can offer you a similar look to a real wood floor with a realistic texture.

There are an extensive range of vinyl floor patterns available, replicating many different styles of wooden and mineral floors such as slate and stone.

Vinyl flooring is also now available in a range of different sized planks which need to be glued down to the floor – there is a new range of vinyl which can be clicked into place, facilitating the installation process.

Of course, you may not want a wooden floor design when you choose vinyl, and there are certainly many more options. Developments in the vinyl flooring industry mean that you can pick from finishes such as leather, slate, sandstone and metallic stone.

Choosing the right vinyl flooring company can also mean the benefits of installing the floor is significantly increased. Vinyl flooring is simple and easy to install, similar to a laminate floor, laminate planks can now be slotted and clicked into place. The risk of the flooring being scratched due to footwear is also significantly less, if you choose the right vinyl floor with a protective wear layer; your floor will be virtually scratch resistant and is more likely to withstand indentations.

Spills and stains will also be less stressful as they can be easily wiped or mopped clean. With a vinyl floor, you don’t have to worry about re-varnishing or waxing as you would with a wooden floor. If you live a busy lifestyle, caring for a wooden floor can be time consuming, and so vinyl floors can provide you with many benefits- replicating wooden floors with less hassle and maintenance.

If you are worried about the wet weather in the winter, you don’t have to worry about water, snow or dirt been trodden through onto your floor, as it can easily be mopped or wiped up- not something that is so easily done with a carpet floor. If you have pets, vinyl flooring can also be better suited to your family, if your pet runs through with muddy paws; stains are far more difficult to remove with a carpet.

A vinyl floor can easily be kept on top of by sweeping and damp mopping regularly. It can also save you on vacuuming time and carpet cleaning costs.